Titanium tube material problems in the application Titanium alloy valve

If the main motivation for sunrui Titanium Welded Tube the use of titanium in some parts of the tube may be due to its high strength and low modulus of elasticity, so now to look at the use of the titanium tube Replacement parts are not effective or no benefit in several large cases .
     DelWest adoption in 1977 of the Ti-6A1-4v-made putter, although it weighs much lighter than steel valve set of parts, but it is located in the shorter side of the rocker arm, thus resulting benefits achieved very small signed into almost ineffective. Reciprocating engine parts to reduce weight for the practice is not always correct, but also Sunrui aerospace investment casting to be noted in particular used in conjunction with poor rigidity titanium tube part time. Manufacture of titanium tube past the crankshaft has not yet been widely used. Competition in some applications due to heavy internal crankshaft and the flywheel inertia, so they are expected to withstand the required engine speed. Titanium tube shield with torsional deformation increases may also cause insufficient lubrication, sunrui Titanium Golf Club Heads main bearing load is high and twisting significantly different frequencies.