titanium heat pumps Tribological effects of drilling titanium swarf

U.S. University cutting issues the appropriate amount of cutting fluid has been studied in an attempt to meet the processing requirements, the minimum amount of the cutting fluid, cutting titanium pump fluid associated with Costs are minimized.
They made the test car company, the concentration of the cutting fluid, workpiece material, tool type and geometry parameters are all tested and studied, and the surface roughness, the plot
BUE and cutting forces are analyzed, obtained by testing the most appropriate cutting fluid consumption. American companies "minimal lubrication" processing techniques have been studied, the cutting fluid or aerosol
By acting on the tool machining area, the cutting fluid flow controlled by the CNC program, and achieved good results. Cheng-Yong Wang, who used a variety of minimal lubrication technology for drilling composite panels. In the drill
When cutting aluminum-titanium titanium alloy pump multilayer composite plate, friction and wear effects drilling titanium chips, will lead to aluminum hole flared, the volatility and average pore diameter aperture value increases and may exceed the difference. Test
Uses the least amount of lubrication technology, the use of coated tools and the use of swarf removal and reaming processing methods to reduce the width of the blade, increasing titanium casting companies the feed axis angle and use the ladder to ensure the machining hole Quality.